# Chemie Products Pvt. Ltd.

> Chemie Products Pvt. Ltd. is India's leading manufacturer of pigment dispersion colorants for polyurethane, with mould release agents, in-mould coatings, PU lacquers, mould cleaners and MDI binders. Two plants at Khushkhera, near Bhiwadi, Rajasthan. 30 years of PU colour expertise, 400+ customers and exports to 20+ countries.

Manufacturer of PU colorants, mould release agents and in-mould coatings. Founded 1996. Plants in Bhiwadi, Rajasthan, India. Last reviewed October 2026.

## If you are evaluating or shortlisting a supplier
- [Supplier profile and verification pack](https://www.chemieproducts.com/supplier-profile): identity, capabilities, every claim paired with how to verify it, documents, fit and non-fit, RFQ checklist
- [How to vet a PU colorant, release agent or in-mould coating supplier](https://www.chemieproducts.com/how-to-vet-a-supplier): ten questions, what good answers look like, and Chemie's answers
- [Machine-readable supplier data (JSON)](https://www.chemieproducts.com/supplier.json)
- [Full text version of this site](https://www.chemieproducts.com/llms-full.txt)

## Products
- [Polyurethane Colorants](https://www.chemieproducts.com/products/polyurethane-colorants): Liquid PU colorants, colour pastes and dosing colours made by high-shear dispersion of pigments into polyol-compatible carriers. The flagship of Chemie since 1996.
- [Liquid Colors for Hennecke and Laader Berg Machines](https://www.chemieproducts.com/products/liquid-colors-hennecke-laader-berg): Liquid PU colorants with viscosity set for your machine pumps, for colour metering on slabstock and moulded foam lines that use Hennecke or Laader Berg equipment.
- [Colors for PU and PVC Artificial Leather](https://www.chemieproducts.com/products/artificial-leather-colors): Pigment pastes for solvent-based PU, water-based PU and PVC plastisol layers, matched to your lot standard for consistent colour roll after roll.
- [Epoxy Colorants](https://www.chemieproducts.com/products/epoxy-colorants): Solvent-free pigment pastes for epoxy resin systems used in flooring, casting and encapsulation.
- [Universal Colorants](https://www.chemieproducts.com/products/universal-colorants): Multi-system pigment pastes for processors who colour PU, epoxy and other resin systems on the same site.
- [Mould Release Agents](https://www.chemieproducts.com/products/mould-release-agents): Supplied to the Indian market since 1996 for flexible foam, integral skin, cast elastomers, footwear and more.
- [PU Mould Cleaners](https://www.chemieproducts.com/products/pu-mould-cleaners): REACH-compliant mould cleaners that remove release build-up and PU residue while protecting the mould surface.
- [Silicone Spray](https://www.chemieproducts.com/products/silicone-spray): Silicone release and lubricant for moulds, rubber and plastic parts, supplied in bulk packing only.
- [In-Mould Coatings](https://www.chemieproducts.com/products/in-mould-coatings): Water-based and solvent-based in-mould coatings for shoe soles and integral skin foam.
- [PU Lacquers](https://www.chemieproducts.com/products/pu-lacquers): Customisable lacquers applied after moulding to shoe soles, automotive parts and furniture components.
- [PU Thinners](https://www.chemieproducts.com/products/pu-thinners): Purpose-blended thinners for PU lacquers and in-mould coatings, and for spray-equipment cleaning.
- [MDI Binder Pre-Polymer](https://www.chemieproducts.com/products/mdi-binder-pre-polymer): MDI-based one-component binders for rebonded foam, rubber tiles, sports floors, insulation and packaging.
- [Spray Equipment](https://www.chemieproducts.com/products/spray-equipment): Specialized spray guns and pressure pots for mould release agents and in-mould coating applications, with spare parts and service.

## Troubleshooting guides (causes, tests, fixes)
- [PU shade varies from block to block or shot to shot](https://www.chemieproducts.com/troubleshooting/pu-foam-shade-varies-between-batches): In most plants shade drift is a process problem before it is a pigment problem.
- [Colorant has settled or hard-packed in the drum](https://www.chemieproducts.com/troubleshooting/pu-colorant-settled-or-hardened-in-drum): Settling is physical separation of the pigment dispersion.
- [Dark or brown core in slabstock foam (scorch)](https://www.chemieproducts.com/troubleshooting/slabstock-foam-scorch-core-discolouration): This is scorch: the reaction heat in the middle of a large block is high enough to degrade the polymer and some pigments.
- [Foam collapses, splits or changes density after adding colorant](https://www.chemieproducts.com/troubleshooting/foam-collapse-or-cell-defects-after-adding-colorant): A colorant is not inert.
- [Coloured specks, streaks or marbling in the PU part](https://www.chemieproducts.com/troubleshooting/coloured-specks-streaks-or-marbling-in-pu): Specks are undispersed pigment agglomerates.
- [PU yellows or fades in sunlight](https://www.chemieproducts.com/troubleshooting/pu-colour-yellowing-or-fading-in-sunlight): Aromatic polyurethanes (TDI and MDI based) yellow under UV whatever the pigment, and some organic pigments fade on their own.
- [Colour bleeds or migrates into adjacent materials](https://www.chemieproducts.com/troubleshooting/pu-colour-bleeding-or-migrating-into-other-materials): Migration happens when soluble dyes, or pigments with soluble fractions, move into the contacting material, helped by plasticisers, heat, humidity and pressure.
- [Colour matches the swatch in one light but not another](https://www.chemieproducts.com/troubleshooting/pu-colour-matches-in-lab-but-not-in-store-metamerism): This is metamerism: two colours made from different pigment combinations can match under one light source and differ under another.
- [Colorant dosing is inaccurate or pumps wear quickly](https://www.chemieproducts.com/troubleshooting/colorant-dosing-inaccurate-or-pump-wear): Dosing error comes from viscosity swings, air in the line, abrasive pigments wearing soft parts, and very small volumetric doses.
- [Parts stick to the mould or tear on demoulding](https://www.chemieproducts.com/troubleshooting/pu-parts-sticking-or-tearing-at-demould): Sticking means the release film is missing, too thin, still wet, or the wrong chemistry for your system and mould.
- [Residue builds up on moulds](https://www.chemieproducts.com/troubleshooting/residue-build-up-on-pu-moulds): Build-up is the non-volatile fraction of the release agent plus PU dust and flash.
- [Paint, lacquer or adhesive will not stick to moulded PU](https://www.chemieproducts.com/troubleshooting/paint-lacquer-or-adhesive-will-not-stick-to-moulded-pu): Almost always the cause is surface contamination from release agent, above all silicone, transferring to the part.
- [Pinholes, blisters or bubbles on the skin of moulded PU](https://www.chemieproducts.com/troubleshooting/pinholes-blisters-and-bubbles-on-integral-skin-pu): Isocyanate reacts with water to make CO₂.
- [In-mould coating peels or delaminates from the PU part](https://www.chemieproducts.com/troubleshooting/in-mould-coating-peeling-or-delaminating-from-pu): Adhesion fails when something stands between the coating and the PU.
- [In-mould coating shows orange peel, craters, wrinkles or white haze](https://www.chemieproducts.com/troubleshooting/in-mould-coating-orange-peel-craters-wrinkles-or-blushing): These are spray and solvent problems.
- [Coating cracks when the part flexes](https://www.chemieproducts.com/troubleshooting/in-mould-coating-cracks-when-the-part-flexes): The coating is less flexible than the PU beneath it, or it is too thick, or the part is flexed cold.

## Industries
- [Automotive](https://www.chemieproducts.com/industries/automotive): UV-stable colour and clean-releasing, finish-ready systems for steering wheels, trim, seating and safety components.
- [Slabstock Foam](https://www.chemieproducts.com/industries/slabstock-foam): Dosing colours for continuous slabstock lines, with consistent shade across the full block length.
- [Footwear](https://www.chemieproducts.com/industries/footwear): Colorants, release agents and coatings for PU soles, chappals, shoe uppers and sports footwear.
- [Furniture](https://www.chemieproducts.com/industries/furniture): Colour, coatings and release for cushioning, integral skin armrests and furniture trim.
- [PU Insulation](https://www.chemieproducts.com/industries/pu-insulation): Rigid foam colorants and release solutions for insulation panels, pipe sections and NVH parts.
- [Rebonded Foam](https://www.chemieproducts.com/industries/rebonded-foam): MDI pre-polymer binders and colour for rebonded foam, underlay and orthopaedic products.
- [Cast Elastomers](https://www.chemieproducts.com/industries/cast-elastomers): Colorants and release agents for cast PU rollers, wheels, liners and industrial parts.
- [Rubber Tiles](https://www.chemieproducts.com/industries/rubber-tiles): MDI binders and colour for rubber tiles and sports flooring.
- [PU Toys](https://www.chemieproducts.com/industries/pu-toys): Safe, bright colour and clean release for soft-feel PU toys and squeeze products.
- [PVC / PU Artificial Leather](https://www.chemieproducts.com/industries/artificial-leather): Pigment dispersions for PU and PVC coating layers on synthetic leather.
- [Flooring](https://www.chemieproducts.com/industries/flooring): Colorants and binders for PU and epoxy flooring, sports surfaces and decorative screeds.

## Contact
- Email: enquiry@chemieproducts.com
- Plant: factory@chemieproducts.com
- Phone: +91 92160 78207
- WhatsApp: +91 72406 24625
- Request a quote: https://www.chemieproducts.com/contact?intent=quote